Translate to your language
Tel: (613) 354-1919
Fax: (416) 596-8989



Parts Department / / Hatch Support Rods /

  • The hatch support rods are available for our XR 100, XR 200 and XR 300 hatches.
  • A complete assembly involves the Rod, Slider Casting, and Locking Knob
  • Additional Parts, such as spacers, or mounting bolts are also available

Items are Billed in CAD$
Exchange Rate: USD$1.00 = CAD$1.328
XR95 Hatch Support Rod
Measures: 8 in. (20cm)
5/16" Hole Drilled
Machined groove for O-Ring
USD$79.35
XR100 Hatch Support Rod
Measures: 9.25 in. (23.5 cm)
5/16" Hole Drilled
Machined groove for O-Ring
USD$79.35
XR200 Hatch Support Rod
Measures: 16.5 in. (42 cm)
5/16" Hole Drilled
Machined groove for O-Ring
USD$82.8
XR300 Hatch Support Rod
Measures: 20 in. (51 cm)
5/16" Hole Drilled
Machined groove for O-Ring
USD$85
"New Style" Support Rod Slider
Fits most Models Post 1988
USD$85
"Old Style" Support Rod Slider
Fits most Models Pre 1988
USD$85
Locking Knob
Uses 5/16-18 stud
Smooth Knob is gentle on fingers
USD$9.255

These support rods will fit most of our hatches. If your hatch has the stainless steel prop rod, you will need to drill a threaded hole to connect this adjustable prop rod.

1)  In MOST cases, the B-Arm Slider Casting will screw to the lid (opening section) of the hatch. This will connect via a 1/4"-20 Screw roughly 1-1/4" long. Most of our hatches will have a 'finger' / protrusion on the underside where this would typically be connected.

2)  The Rod slides into the Slider casting, and connects to the base of the hatch. This connects via a 5/16"-18 screw.  Early model hatches with the stainless prop rod didn't have a connection point for the 5/16" bolt.  and you will need to screw this section of the rod into your headliner.

3)  The Locking Knob threads into the Sider Casting, and tightens on the Rod to lock the hatch open at any angle to set it to.